学科分类
/ 3
53 个结果
  • 简介:采朋数据统计和绘制散点图方法,分析研究Q235B普碳钢铸坯锰硫比与钢板冷弯性能和冷弯完好率之间的关系。

  • 标签: Q235R普碳钢 锰硫比 冷弯性能
  • 简介:鞍矿矿机厂使用新的铸造工艺——负压造型生产低合全耐磨铸钢纽合铲齿—齿尖和齿座替代295BⅡ电铲进口备件。选择磨损性能和抗冲击性能最佳低合金耐磨铸钢,生产出安装自如,互换性好,抗弯耐磨的合格齿尖和齿座,满足进口设备备件的尺寸公差、形位公差、要求精、互换性好的产品。

  • 标签: 电铲 组合铲齿 耐磨铸钢 工艺装配 负压造型 铸造
  • 简介:YPO_4phosphorssingle-dopedwithSb~(3+)orGd~(3+)andco-dopedwithSb~(3+)andGd~(3+)werepreparedbyasolid-statereactionmethod.Thephasepurity,morphology,photoluminescenceexcitationandemissionpropertiesofthepreparedphosphorswereinvestigated.TheresultsshowedthatSb~(3+)couldsensitizeGd~(3+)intheco-dopedphosphorswhichmadethephosphorsexcitablebyshort-waveultraviolet(UV)atawavelengthbetween220and260nm.Under253.7nmexcitation,theco-dopedphosphorsY_(1–x–y)PO_4:Sb~(3+)x,Gd~(3+)yshowedstrongemissionofGd~(3+)atawavelengthof312nmwhoseintensitychangedwiththedopingconcentrationsofGd~(3+)andSb~(3+).TheoptimizedY_(0.77)PO_4:Sb~(3+)0.07,Gd~(3+)0.16phosphorshowedanintensitycomparabletocommercialLaPO_4:Cephosphor(UVB-315),makingitapotentialcandidateformercurylow-pressuredischargenarrow-bandUV-Bemittinglamps.

  • 标签: PHOSPHOR narrow ultraviolet doping excitation CALCINATION
  • 简介:Themicrostructuresandprecipitatesinbasemetalsandheataffectedzones(HAZs)oftwoZr-Bmicroalloyedsteelswerecharacterizedbymeansofopticalmicroscopy(OM),transmissionelectronmicroscopy(TEM)andenergydispersivespectrum(EDS).Ithasbeenfoundthatprecipitatesoftensofnanometersinsizearepresentinthebasemetalsofbothsteels.Theaverageparticlesize,however,intheZr-BsteelwithTiislargerthanthatinthesteelwithoutTi.Afterthermalsimulations,inbothcases,theMnSsulfidescannucleateoncubic(Nb,Ti)(C,N)carbonitridesandnearlysphericalZr-bearingcompounds.TheprecipitatesintheHAZsofbothsteelsarecoarserthanthoseinthebasemetals,intherangesof150-200nmand50-100nmforTiaddedandTi-freesteels,respectively.

  • 标签: 微合金化钢 焊接热模拟 热机械控制工艺 微观组织 TI-IF钢 透射电子显微镜
  • 简介:为了进一步降低生产成本,葫芦岛有色综合利用厂科学论证,创新思路,打破精铋生产中加锌除银工艺的传统,将加入精锌除银改用B号锌代替,可减少成品精锌使用量,减少资金占用,降低生产成本。此项工艺改造于2014年9月份开始实施,葫芦岛有色克服了原料变化产生的影响,通过不断调整工艺参数,摸索B号锌合适的加入量,逐渐稳定了生产工艺。

  • 标签: 加锌除银 生产成本 工艺改造 葫芦岛 精铋 科学论证
  • 简介:根据武钢的发展规划,为满足5号高炉的精料要求,并实现以产顶进,程潮铁矿新建120万t/a矗球团厂,球团厂于2003年12月17日投产。程潮铁矿所产的磁铁精矿,易磨,品位高,有害元素的含量极少,是一种非常优质的磁铁精矿。这种磁铁精矿的焙烧性能十分良好,特别适于生产优质球团矿,

  • 标签: 球团生产 辊压机 磁铁精矿 程潮铁矿 有害元素 球团厂
  • 简介:Theeffectofanexternalelectricfieldonthecrystallizationbehaviorofamorphous(Nd0.1Fe0.9)3Balloywasinvestigated.ThecrystallizationproductofNd2Fe23B3phasewasobtainedforthisamorphousalloyannealedat923Kfor300sinthepresenceofanexternalelectricfieldof300kV·m-1(50Hz);whilethecrystallizationproductsareNd1.1Fe4B4,α-Fe,andFe3Bphasesunderthesameannealingconditionexceptforfree-electricfield.Ontheotherhand,thesampleswereannealedat1023K,whichishigherthanthedecompositiontemperatureofmetastableNd2Fe23B3phase,for600s.Inthecaseofthepresenceofanexternalelectricfield,themetastableNd2Fe23B3phase,asamainphase,isstillstayedinthesample.ThisfactsuggeststhattheexternalelectricfieldenhancesthestabilizationofthemetastableNd2Fe23B3phase.Theeffectoftheexternalelectricfieldonthephaseselectionandstabilizationwasexplainedintermsofthespecificconductancedifferencebetweenthecrystallizationproducts.

  • 标签: 电场 稀土元素 磁性材料 相位选择 无组织合金
  • 简介:采用DH.2080型超音速等离子设备将粒度53~106lam的高铝铜合金粗粉喷涂到45”钏表面制备涂层。在高铝铜合金粉术中加入微量元素Ce和B,研究Ce和B对高铝铜合金粗粉的超音速喷熔性能以及涂层组织结构的影响。结果表明:末加入元素Ce和B的涂层氧化严重,尤其是在界面处聚集大量氧化物,涂层和基体不能实现有效结合,涂层中较多的氧化物和孔隙隔离层流片熔结,并且涂层成分偏析严重。加入微量稀土元素Ce和B后,喷熔层组织细小均匀,成分分布均匀,涂层氧化程度大大减小,涂层和基体结合良好。Ce和B的加入还可改变涂层组织相的彤成规律,即由原来的非平衡结晶方式转变为平衡结晶方式。此外,Ce和B的加入使涂层硬度由362HV提高到432HV。

  • 标签: 超音速等离子 高铝铜合金 涂层
  • 简介:TheNd60Fe20Al8Co10B2alloywaspreparedbysuctioncastingofthemoltenalloyintoacoppermoldunderargonatmosphere.Themicro-structuralandmagneticpropertychangesintheNd60Fe20Al8Co10B2alloyduringcrystallizationwereinvestigatedbyX-raydiffraction(XRD),differentialscanningcalorimetry(DSC),scanningelectronmicroscope(SEM)andthevibratingsamplemagnetometer(VSM).TheprecipitationandNd-richandFe-richphaseshavenosignificanteffectontheintrinsiccoercitityforNd60Fe20Al8Co10B2alloyannealedbelow723K.However,thegrowthofFe-richphasedecreasesthesaturatemagnetizationandremanenceofthealloy.Thehardmagneticbehaviorisdisappearedwhenthealloyisfullycrystallized.

  • 标签: Nd60Fe20Al8Co10B2 铸造合金 结构 磁性能 XRD DSC
  • 简介:La15Fe77B8hydrogenstoragealloyswerepreparedusingavacuuminduction-quenchingfurnace.TheresultsofX-raydiffraction(XRD)andscanningelectronmicroscopy(SEM)suggestedthatLa15–xSmxFe2Ni76Mn5B2(x=0,2,4,6)alloyshadmultiphasestructureincludingthemainLaNi5phase,La3Ni13B2phaseand(Fe,Ni)phase.WiththeincreasingsubstitutionofSmforLa,themainphasestructureofalloysdidnotchange,whiletheunitcellvolumesdecreased,thecyclestabilitywasimprovedandthemaximumdischargecapacitydecreased,butthelowtemperaturemaximumdischargecapacityofthesamesubstitutionalloywasgraduallyapproachingthemaximumdischargecapacityatroomtemperature,whichshowedthatLa15Fe77B8hydrogenstoragealloysofthepartialsubstitutionofSmforLahadbetterlow-temperaturedischargeability(LTD).Forthesamesubstitutionalloys,self-dischargecharacteristicsandcyclestabilityatlowtemperaturewerebetterthanthatatroomtemperature.Furthermore,thehigh-ratedischargeability(HRD)andtheexchangecurrentdensityI0firstincreasedandthendecreasedwiththeincreasingofSmcontent,whereasthehydrogendiffusioncoefficientDinalloybulkdecreasedgradually,whichindicatedthatappropriatesubstitutionofSmforLaimprovedtheelectrochemicalkineticspropertiesofthealloys.TheHRDwasmainlydominatedbythecharge-transferrateonthealloysurface.

  • 标签: 贮氢合金 电化学性能 多相结构 高倍率放电性能 LANI5 扫描电子显微镜
  • 简介:EffectsofNbandZrsubstitutionsonthecrystal]izationbehaviorsandmagneticpropertiesofmelt-spun(Nd,Pr)2Fe14B/α-Fealloyswerestudied.Theresultsshowthatfor(Nd0.4Pr0.6)8.5Fe85.5B6ribbons,themetastable(Nd,Pr)3Fe62B14precipitatesaftertheinitialcrystallizationofα-Feanddecomposesintothefinalmixtureof(Nd,Pr)2Fe14Bandα-Fe.For(Nd0.4Pr0.6)8.5Fe84.5Zr0.5Nb0.5B6ribbons,however,(Nd,Pr)2Fe14Bandα-Fephasesprecipitatesimultaneously.ThisindicatesthatbothNbandZrdopingcanavoidtheformationofmetastablephaseand!

  • 标签: 稀土 磁性材料 磁力结构
  • 简介:通过电化学分析与测试,研究B4C体积分数分别为20%、30%、40%的B4C/Al基复合材料及其基体合金(6061铝合金)在不同浓度及不同温度的硫酸溶液中的腐蚀行为。由动态极化曲线和阻抗谱得到相应的电化学参数,并利用阻抗分析软件对该复合材料和基体合金腐蚀过程的等效电路进行模拟,分析腐蚀机理,通过Arrhenius方程计算腐蚀过程中B4C/Al基复合材料与6061铝合金的反应活化能,并分析两者的焓变与熵变,对腐蚀前后2种材料界面的微观结构进行观察。结果表明:B4C/Al基复合材料在硫酸溶液中的腐蚀速率随B4C颗粒含量增加而增大,基体铝合金在硫酸中的耐腐蚀性能高于B4C/Al基复合材料。B4C/Al基复合材料和基体铝合金在硫酸中的腐蚀速率都随硫酸溶液浓度增加而增大;当溶液温度升高时,二者的腐蚀速率都快速增加。B4C/Al基复合材料和Al基体合金在硫酸溶液中的腐蚀都表现为明显的点蚀。铝基体材料在硫酸溶液中的反应活化能大于B4C/Al基复合材料,计算所得活化焓与活化熵的均表明复合材料的腐蚀反应比基体合金更容易进行,因而遭受腐蚀更严重。

  • 标签: B4C/Al复合材料 H2SO4溶液 电化学方法 显微组织