简介：8月29日，包头国家稀土高新区对外发布消息称，稀土高新区根据包头市建设稀土新材料基地的战略目标，拟用5～10年的时间，将包头建成全国最重要的稀土新材料基地。

简介：(Cu60Zr30Ti10)98Y2bulkmetallicglass(Φ4mm×70mm)wasobtainedsuccessfullybycoppermouldcoolingandspraying-casting,andsomesampleswereisothermallyannealedattemperaturesof473and623K,whichwaslowerthantheglasstransitiontemperature(Tg)for1h.Microstructureandpropertiesofas-castandannealedsampleswerestudied.Crystallizationphases(Cu10Zr7andCuZr)wereobservedinannealedsamples,andthespeciesandfractionofthesephasesincreasedwithincreasingannealingtemperature.Mic...

简介：采用压力烧结法制备不同碳含量的WC-10Co-0.6Cr3C2硬质合金，通过金相组织观察、硬度测试、比饱和磁化强度和矫顽磁力的分析，研究该合金的微观组织结构和性能。结果表明，随碳含量增加，合金的饱和磁化强度增大，而密度、矫顽磁力及硬度均降低；在压力烧结条件下，对于WC-10Co-0.6Cr3C2合金，两相正常组织对应的碳含量范围为5.41%～5.55%。碳含量低于5.41%时出现缺碳相η相，碳含量高于5.55%时出现石墨相。

简介：以金属Zr、Cu和Al为原料,通过真空熔炼和气体雾化制备Zr-Cu-Al合金粉末,再经高能球磨得到Zr50Cu40Al10非晶合金粉末。采用氮/氧分析仪、X射线衍射仪（XRD）、扫描电镜（SEM）和热分析仪（DSC）对其非晶形成能力及晶化行为进行研究。结果表明,球磨120h后可获得Zr50Cu40Al10非晶合金粉末,且随球磨时间增加,粉末的颗粒尺寸逐渐减小,90h后达到亚微米级。球磨过程中由于铁的增加,使合金的结构＂混乱度＂增加、负混合热增大,因而热稳定性增强,其过冷区间ΔTx为62K,约为雾化法制备的非晶合金粉末的2倍。此外,采用非等温晶化方法,用KISSINGER方程计算出机械合金化Zr50Cu40Al10非晶合金的玻璃转变和初始晶化的表观激活能分别为152.6kJ/mol和172.4kJ/mol,远小于相应的气体雾化法制备的Zr50Cu40Al10非晶合金粉末表观激活能,其原因是粉末中氧含量和体系自由能较高。

简介：据日本不锈钢协会近日公布的数据，日本2014年10月的热轧不锈钢产量为264134吨，环比增加1．4％，同比增加5．8％。其中，棒型材17604吨，环比大致持平，同比增加19．6％；线材21894吨，环比减少0．2％，同比增加0．2％；管材27523吨，环比增加5．3％，同比增加I．0％：板材197113吨，环比增加1．2％，同比增加6．0％。

简介：MeltspinningtechnologywasusedtopreparetheMg2Ni-type(Mg24Ni10Cu2)100–xNdx(x=0,5,10,15,20)alloysinordertoobtainananocrystallineandamorphousstructure.TheeffectsofNdcontentandspinningrateonthestructuresandelectrochemicalhydrogenstorageperformancesofthealloyswereinvestigated.ThestructurecharacterizationsofX-raydiffraction(XRD),transmissionelectronmicroscopy(TEM)andscanningelectronmicroscopy(SEM)linkedwithenergydispersivespectroscopy(EDS)revealedthattheas-spunNd-freealloydisplayedanentirenanocrystallinestructure,whereastheas-spunNd-addedalloysheldananocrystallineandamorphousstructureandthedegreeofamorphizationvisiblyincreasedwiththerisingofNdcontentandspinningrate,suggestingthattheadditionofNdfacilitatedtheglassformingoftheMg2Ni-typealloy.TheelectrochemicalmeasurementsindicatedthattheadditionofNdandmeltspinningimprovedtheelectrochemicalhydrogenstorageperformancesofthealloyssignificantly.Thedischargecapacitiesoftheas-castandspunalloysexhibitedmaximumvalueswhenNdcontentwasx=10,whichwere86.4,200.5,266.3,402.5and452.8mAh/gcorrespondingtothespinningrateof0(As-castwasdefinedasthespinningrateof0m/s),10,20,30and40m/s,respectively.Thecyclestability(S20,thecapacitymaintainrateat20thcycle)oftheas-castalloyalwaysrosewiththeincreasingofNdcontent,andthoseoftheas-spunalloysexhibitedthemaximumvaluesforNdcontentx=10,whichwere77.9%,83.4%89.2%and89.7%,correspondingtothespinningrateof10,20,30and40m/s,respectively.

简介：Ca-dopedBaMgAl10O17:Eu2+,Mn2+(BAM)bluephosphorsweresynthesizedbyfluxassistedsolid-statereactionmethodusingCaF2andBaF2asco-flux.GooddispersityandparticlesizehomogenizationofhexagonalpurephaseBAMwereobtainedbysinteringat1400℃.TheeffectsoftheCa2+ionscontentonthestructure,morphologyandphotoluminescencepropertiesofthephosphorswerestudied.TheresultsindicatedthattheincorporationofCacoulddecreasethelatticeconstant,improvethehomogeneityanddispersityandenhancethephotoluminescence(PL)intensityofthephosphoreffectively.TheoptimumBa0.86Ca0.04Mg0.97Al10O17:0.1Eu2+,0.03Mn2+PLintensitywasenhancedforabout30%andrelativebrightnesswasimprovedabout4%.Furthermore,thesynthesizedBAMandcommercialBAMphosphorswereannealedfor30minat600oCinair.TheCa-dopedphosphorshadstrongeremissionintensity,higherbrightnessandbetterchromaticitystabilitythanthatofthecommercialphosphor.TheseresultsindicatedthatCa-dopedbluephosphorshadgoodpotentialapplicationsinthecommercialtricolorfluorescentlampsaswellasinotherdisplayandlamps.